Buying Guide · Disposable Bedding
GSM decides whether your bedding survives one night or four. Size decides whether it fits the bed you actually have. Get those two numbers right and everything else — price, packing, freight — follows.
Start with GSM, not with price
GSM — grams per square metre — is the single number that determines how a disposable sheet feels, how long it lasts and how much it costs to ship. Two suppliers can quote the same set at very different prices because they are quoting different weights, and the difference is invisible in a photo.
The practical range for hotel and travel bedding is 18 to 35 gsm. Below 18 the material tears at the corner when housekeeping pulls it tight. Above 35 you are paying for durability most single-night properties never use.
What each weight is actually for
| 18–20 gsm | Single-night transit hotels, airline crew rest, emergency stock. Cheapest to air freight. Expect visible creasing and a paper-like hand feel. |
|---|---|
| 25 gsm | The default for most hotel groups. Survives a guest sitting on the bed, holds a fold, feels closer to soft linen than paper. Best cost-to-complaint ratio. |
| 30 gsm | Multi-night stays, spa and wellness properties, serviced apartments. Noticeably softer, resists pilling through a second night. |
| 35 gsm+ | Clinics, massage tables, anywhere the sheet is reused within a session. Approaches reusable textile cost. |
A common mistake is ordering one weight across an entire property. Most groups we work with run 25 gsm as standard and 30 gsm only in suites — the guest who pays more notices the difference, the guest in a standard room does not.
Sizes: match the bed, not the catalogue
Disposable bedding is cut to finished dimensions, so there is no shrinkage allowance to hide behind. If the flat sheet is 10 cm short you will see it every time the bed is made.
| Single / Twin | Flat sheet 160×230 cm · duvet cover 150×200 cm · pillowcase 50×70 cm |
|---|---|
| Double / Full | Flat sheet 180×230 cm · duvet cover 200×200 cm · pillowcase 50×70 cm |
| Queen | Flat sheet 200×230 cm · duvet cover 200×230 cm · pillowcase 50×70 cm |
| King | Flat sheet 230×250 cm · duvet cover 220×240 cm · pillowcase 50×90 cm |
European properties usually specify 90×200 cm single beds, North American properties 99×190 cm twins, and Asian chains frequently run 120×200 cm. Send us the mattress dimensions and the tuck allowance you want on each side — typically 20 cm — and the cut size is calculated from that rather than from a standard table.
Three specification errors that cost the most
1. Specifying weight but not material
25 gsm PP non-woven and 25 gsm SMS behave differently. SMS has a melt-blown layer that resists liquid penetration; PP does not. If the sheet sits under a spa treatment, that layer matters more than the weight.
2. Forgetting the packing format
A four-piece set packed loose takes roughly 40% more carton volume than the same set compressed into one bag. On a 20-foot container that is the difference between 1,800 and 2,500 sets.
3. Approving a sample without a night on it
Ask for three sets, not one. Use one dry, one after a shower, one with a child on the bed. The failures show up in use, not in the sample bag.
How to sample without wasting a cycle
Send four things with your sample request: mattress dimensions, target GSM, packing format and artwork (or a note that the bag will stay blank). With those, the first sample is normally the approval sample. Without them, the usual outcome is a second round and two extra weeks.
Sampling runs about 10 days. Production runs 10–15 days after approval, at a minimum of 1,000 sets per size and weight combination.
Related reading
If you are still deciding which format to buy, start with the 4-piece disposable bedding set — it is the configuration most groups settle on, and the page lists the full specification range. For material comparisons, read SMMS vs SMS vs spunlace.
Need a spec checked?
Send your mattress size and target GSM — we will come back with a cut size and a quote.
